|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small screw-in insulator.
|
With Zareba? black 4 ft step-in fence posts, quickly set up fencing in any outdoor area. Set up your fence perimeter by installing these fence posts and then run your fence line between them. While Zareba? designed these posts with electric fencing in mind, they can also be used for setting up perimeters for crowd control, construction zones and property marking. They can even hold decorations or serve as vegetable or plant stakes.
|
Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects 1 in polytape to the end insulators to reach all of your fence posts.
|
Our Zareba? large ceramic lag screw insulators are used to attach electrified wire to wood posts without losing energy through the post. These ceramic insulators can be used with all fence wire, including high tensile, as well as poly rope and poly tape.
|
Corner posts need these extra tough electric fence insulators that can withstand the strain of the wire. The Zareba? yellow corner post insulator is formed of thick, tough plastic that can withstand the strain of wire on your electrified fences. These yellow electric fence insulators are packed 10 per bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Unique step-in design with adjustable insulators that can be used with BayGard wire, Bayshock? wire or BayGard HV "High Visibility" tape. Excellent performance.
|
Our Zareba? high-tensile, three-hole twisting tool is an essential tool for bending or twisting high tensile wire, poly spacer clips or for twisting T-post or spacer clips to fasten wire on to posts. Use with up to 8 ga wire.
|
With Zareba? white 4 ft step-in fence posts, quickly set up fencing in any outdoor area. Set up your fence perimeter by installing these fence posts and then run your fence line between them. While Zareba? designed these posts with electric fencing in mind, they can also be used for setting up perimeters for crowd control, construction zones and property marking. They can even hold decorations or serve as vegetable or plant stakes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
|
When planning your fence, there are several things you should consider. Among these things are placement of the gate and the type of gate handle to use. Your electric fence gate, if possible, should be placed at corners instead of in the middle of the fence. This extremely sturdy Fi-Shock? rubber gate handle is virtually indestructible and will not crack in cold weather.
|
For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible. Connects the polytape to the energizer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel.
|
Connects 2 in polytape to the end insulators to reach all of your fence posts.
|
Add visibility to your electric fence with these Zareba? electric fence warning signs. These signs make people aware of the electrified fence. Low cost and easy to install. Many county laws require electric fence warning signs every 250 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel spring clip for 3/8 in and 1/2 in fiberglass rod posts. Will not rust or corrode. Safely and securely attach electrified wire or poly wire to fiberglass or rod posts. 20 clips/Bag.
|
For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode.
|
Our Zareba? electric fence wire tap electrically connects one fence wire to the next or hooks up wire to fence wire. It fits 12-1/2 to 16 ga wire. Crimping tool required; crimp twice for a secure connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sharp-edged T-post tops can be dangerous to your horses and livestock, causing injury to the animals and expensive veterinary bills for you. The Zareba? T-post safety cap and insulator protect animals from the sharp-edged T-post tops. They fit 1-1/4 and 1.33 in standard stubbed T-posts and accommodate any gauge wire and polytape up to 2 in. Holds tape tightly to limit movement.
|
Insulating grip is soft and flexible with safety flanges for extra shock protection. Unique fastening plate ensures a secure wire connection. Will not break, crack or chip. Steel components are plated to resist rust.
|
Our Zareba? donut corner insulator can be used with all wire and poly wire and with poly tape up to 1/2 in. Can also be used with high tensile fencing. Made from unbreakable polycarbonate, this insulator will not chip or crack and has a tensile strength of 5000 lb. Built-in wire channel keeps wire centered.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Fi-Shock? in-line strainer handle attaches to any of the Fi-Shock? heavy-duty in-line strainers (model 400-399) you have installed around your fence. With the handle, you can quickly and easily ratchet up the tension on your electric fence wires.
|
The Zareba? yellow snap-on 5 in extender T-post Insulator extends the wire 5 in from the post. This yellow insulator fits securely on standard (1-1/4 in or 1.33 in) studded T-posts. No hardware is needed to put this insulator on a post.
|
Our Zareba? large corner post ceramic insulators, pack of 10 with washers can be used with all fence wire, including high tensile, polywire, polyrope and 1/2 in polytape. They have a diameter of 1-3/4 in. These insulators are durable and dependable with great insulating performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to indicate tension of wire. One inch of compression equals 150 lb of pull. Use one in conjunction with in-line strainer for each leg of fence. Electroplated to deter rust.
|
The Zareba? multi-light electric fence tester makes it easy to measure the amount of voltage in your electric fence. Our electric fence tester measures the voltage drop between points along an electric fence. The lights on our tester are calibrated to glow from 600 to 5500 V.
|
Our Zareba? wraparound electric fence post insulator is made of non-conductive polyethylene with an aluminum insert for strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Is your charger worn out or not working at its full capacity. This 4 V replacement battery will get your charger back in ideal working order. This replacement battery is designed for use with ESP2M-FS, ESP2M-Z, SS-440 and SS-740 chargers. Most chargers can hold a charge long after they have been unplugged or disconnected from the battery. An unplugged charger can still shock you. The consumer assumes all risk when repairing or utilizing a charger that has been "repaired" or modified. In addition, once the charger has been opened all warranties are null and void and state of federal inspections and approvals are terminated.
|
Used for insulating hot feed wires to be strung overhead or underground to bring electricity to the fence. Can also be cut to insulate live wires from neutral wires and to enclose wires buried underground for crossing underneath gateways.
|
Ideal for portable electric fencing and controlled grazing. Made from strong durable fiberglass. Will not rust or rot. Lightweight, easy to handle. Flexible, non-conductive. Rods are sharpened for easy driving. Easy to install and move.
|
|
|
