|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
|
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications.
|
Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F.
|
Christy's? Red Hot Blue Glue? is a very aggressive, deep blue, medium bodied, very fast setting PVC solvent cement. Christy's? Red Hot Blue Glue? is the industry's high quality blue glue, from the leading producer of high performance solvent cements.
|
Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
|
Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
|
Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
|
Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
|
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
|
Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). For use on PVC pipe through 2 in SCH 40 pressure piping and up to and including 4 in SCH 40 non-pressure (DWV) piping, it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top.
|
For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set, designed for use on all duct and conduit applications through 6 in Dia. Apply at temperatures 40 to 110 deg F. NSF certified for use in potable water, sewer, drain and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
|
Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed.
|
Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
|
Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings of diameter up to 6 in. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. Sales area - only in the western region.
|
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
|
Medium bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6 in Dia in non-pressure transition joints. Recommended application temperature is 40 to 110 deg F. Meets ASTM D-3138.
|
Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
|
Medium body multi-purpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2 in SCH 40 and non-pressure piping systems through 6 in SCH 40 (excluding SCH 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top.
|
Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
|
Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F.
|
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
|
|
|
