|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAMCO water heater element quick change tool helps you save time and water when changing your water heater element. Instead of emptying your entire water heater tank just to change the element, simply turn off the water at the water heater to create a vacuum. Securely attach the tool and place a bucket handle in the built-in groove to catch any excess water. Quickly change the element and remove the tool when you're done.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Richmond Element Wrench, Dual, SAE/Metric: SAE, Head Size: 1-1/2 in, 1-7/8 in, 5 in L
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
Fits standard 1/2 in socket drive to replace screw-in water heater elements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
A double body strap water heater restraint system for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts and (2) 3/8 in hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 ga CRS, galvanized material. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A double-body strap water heater restraint kit for water heaters up to 120 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and (2) 3/8 in hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 ga CRS, galvanized material. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes 24 in thermocouple, burner door gasket, Tinnerman?? clips, screws, Torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
|
For front-loading machines. High-impact white polypropylene. 31 in x 35 in OD and 29 in x 33 in ID. 1-1/2 in PVC drain.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
For gas or electric water heaters. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAMCO aluminum water heater drain pan has a 32 in I.D and fits underneath gas or electric water heaters to help collect and drain off leaking water. The aluminum pan will not rust or crack and it has a pre-cut hole for the included PVC fitting.
|
Plumb Pak Water Heater Connector, Nominal Size: 3/4 in, FIP x MIP Connection, Stainless Steel, 24 in L, Suitable for: Water Heaters
|
Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A double-body strap water heater restraint kit for water heaters up to 80 gal in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8 in carriage bolts, (2) caps and (2) 3/8 in hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 ga CRS, galvanized material, with a protective non-scratch painted coating and protective safety cap. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465.
|
The tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. The pans are injection molded to give them great strength and durability.
|
3 in x 48 in x 75 in vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gal tank, plastic tape. For gas, oil or electric water heaters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on gas, oil or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm and brass 3/4 in (20 mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum pressure 150psi (10 bar).
|
This wall-mount, aluminum tankless drain pan is designed to fit underneath most whole house tankless water heaters providing both water damage protection and flushing maintenance convenience. These aluminum pans will not rust, corrode or crack and may be used for gas or electric water heaters.
|
Places gas water heaters 18 in above floor as required by the National Fuel Gas and Plumbing Codes. Galvanized sheet metal of 18 ga thick holds up to 50 gal water heaters. Many local building codes require a water heater stand for gas water heaters located in areas where the accumulation of combustible fumes may occur.
|
|
|
