|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
Anderson Metals Short Nut, Nominal Size: 3/8 in, Flare Connection, Flared Angle: 45 deg, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper, Steel Tubing
|
Two piece construction nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F. temperature range. Resists mechanical pullout. Easy to disassemble and can be re-assembled many times with no effect on the seal. No flaring tool required. Primary uses fuel equipment, plumbing, gases refrigeration and vacuum. UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
For use with F0-6 (9/16-24) flare nut IBM # 9166414.
|
BrassCraft Pipe Adapter, Nominal Size: 3/8 in, Female Connection, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anderson Metals Tube Adapter, Nominal Size: 3/8 in, Brass
|
The flare reducing male adapter is highly dependable and an economical choice of fitting for refrigeration, compression, heating and air and other industrial markets. This all-brass fitting features a vibration-resistant construction. It resists mechanical pullout and is designed for high pressure service.
|
Anderson Metals Tube Elbow, Nominal Size: 3/8 in, Angle: 90 deg, 1000 psi, Operating Temperature: 73 deg F, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anderson Metals Pipe Union, Nominal Size: 5/8 in, Flare Connection, 650 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Steel Tubing
|
Anderson Metals Tube Elbow, Nominal Size: 1/2 x 3/8 in, Angle: 90 deg, 750 psi, Operating Temperature: 73 deg F, Brass
|
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Anderson Metals Space Heater Tube Nut, Nominal Size: 3/8 in, 1000 psi, Temperature Rating: 73 deg F, Brass
|
UPC individually bagged.
|
UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
|
UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
UPC individually bagged.
|
UPC individually bagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
UPC individually bagged.
|
Anderson Metals Short Nut, Nominal Size: 1/2 in, Flare Connection, Flared Angle: 45 deg, 750 psi, Temperature Rating: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper, Steel Tubing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
UPC individually bagged.
|
Watts 39-P Pipe Plug, Nominal Size: 1/2 in, Flare Connection, 750 psi, Operating Temperature: -65 to 250 deg F, Brass, 8 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC individually bagged.
|
Anderson Metals Pipe Connector, Nominal Size: 1/2 x 3/8 in, FPT x Flare Connection, 750 psi, Operating Temperature: 73 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Steel Tubing
|
Anderson Metals Pipe Union, Nominal Size: 1/4 in, Flare Connection, 1400 psi, Operating Temperature: -65 to 250 deg F, Brass, Suitable for: Aluminum, Brass, Copper and Steel Tubing
|
|
|
