Home > ELECTRICAL > SPECIALTY ELECTRICAL > TOOLS & TESTERS
Choose a sub category:
FISH TAPES CONDUIT BENDERS WIRE STRIPPERS & CRIMPING TOOL
CIRCUIT/VOLTAGE TESTERS FUSE PULLERS LIGHT BULB CHANGERS
ALLIGATOR CLIPS GREENLEE SPECIALTY TOOLS/ACCES MISC TOOLS & ACCESSORIES
Sort By:
1 2 3 ... 7
GB-Gardner Bender 14-075 Alligator Clips GB-Gardner Bender 14-078 Alligator Clips GB-Gardner Bender 14-076 Alligator Clips
For home, auto and marine applications. For home, auto and marine applications. For home, auto and marine applications.
GB-Gardner Bender 14-077 Alligator Clips Gardner Bender 14-630 Battery Clamp Gardner Bender GET-3100 Voltage Tester
For home and auto applications. These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle. Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
Gardner Bender RTL-108 Replacement Medium Test Lead Gardner Bender 14-610 Insulated Battery Clamp Gardner Bender GAT-3400 Automotive Circuit Tester
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use. These Gardner Bender 10 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle for convenience. Used to test DC voltage in automotive applications. Features 3 ft test lead with alligator clamp and 360 deg bright visual indicator. Durable ABS housing with pocket clip. Checks fuses in junction block, automotive circuits for voltage. Back probe connectors and sockets. No batteries required.
Cooper BP914 Circuit Tester Gardner Bender GET-3202 Low Voltage Voltage Tester Bussmann HEF-1 Assortment Fuse Kit
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors. This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC. Contains 2 1 A, 1 2 A and 2 3 A glass tube AGC fuses.
GB CR-1000 Cable Ripper Milwaukee Clipper GS-40 Adjustable Wire Cutter/Stripper Bussmann HEF Fuse Kit
Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable. This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes. Bussmann Time Delay Fuse Kit, 250 V, Glass Body, 1/4 in, 5 mm Diameter, 1-1/4 in, 20 mm Length, Includes: (1) MDL-1/2, (1) MDL-1, (1) MDL-2, (1) GDC-1, (1) GDC-2 Fuse
Sperry ET6102 Single Range Voltage Tester Stanley 84-213 Adjustable Wire Stripper/Cutter Gardner Bender GTPS-3100 Cable Stripper
The patented design of this heavy-duty AC/DC voltage tester allows for convenient single hand testing of outlets when the probes are snapped into the bottom housing of the tester. Just insert the probes into the outlet and if voltage is present the neon indicator will glow. The Stanley 5 in wire stripper/cutter features an adjustable slide stop and hold designed for bending and looping wire and an oil-resistant dipped handle for comfortable grip. For pro and DIY electrical repair. Meets ANSI specifications. Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
GB-Gardner Bender CT6101 Continuity Testers Toolbasix JL-SST-401183L Cable Crimper Gardner Bender GET-3213 3-Range Voltage Tester
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use. The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings. Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
Wire-Aide 79-006N Non-Toxic Wire Pulling Lubricant Gardner Bender GRT-3500 Outlet Tester Gardner Bender GCT-3304 Low Voltage Twin Probe  Continuity Tester
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed. This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords. Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
Gardner Bender GS-386 Diagonal Cutting Plier GB-Gardner Bender LNW-KIT Locknut Wrenches Performance Tool W2974 Multimeter Tester
Tapered nose allows cutting in tight locations. Dual-cutting edge and high-leverage comfort grip handle design for optimal cutting performance. Precision-machined and induction-hardened knives strengthen cutters and provide consistent performance when cutting aluminum, copper and medium-hard steel wire. The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends. Wilmar Multimeter Tester, Accuracy: +/-0.5 %, Display Type: LCD, Digital, Power Source: Battery, Power Supply: 9 V
Smart 3002 Bulb Changer Kit Gardner Bender GBT-3502 Battery Tester Smart 3001 Bulb Changer Kit
Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. Mr. LongArm bulb changers are the smart way to change light bulbs. The floodlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
   
 
1 2 3 ... 7