|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures.
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for projects such as pergolas, patio covers and other top-supported structures.
|
The E-Z Spike is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. This post-base allows for easy installation of 4 x 4 wood posts without digging holes or pouring concrete.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APDPC decorative post cap is an Outdoor Accents? accessory that provides moisture protection and a decorative appearance to wooden post tops. The black textured composite material has UV protection. Available in sizes for nominal 4 x 4 and 6 x 6 wood posts.
|
The RPBZ retrofit post-base is designed to reinforce existing posts and columns. The single, versatile model will fit on any size post consisting of a double 2 x 4 or larger. RPBZ can also be used to reinforce new post-base connections such as braced carports, patio covers, decks and other structures. The RPBZ can be installed with the CPS composite plastic stand-off to meet a 1 in post stand-off code requirement. A single RPBZ can be installed on a post that is flush to a corner and two RPBZs can be installed at away from edge conditions to fortify the post-base connection to resist both wind and seismic forces. Strong-Drive? SDS heavy-duty connector screws install easily and provide excellent holding strength for post to flange connections. Additionally, the RPBZ can be purposed as a temporary base fixture for posts when shoring beams. RPBZ comes standard in ZMAX? finish to meet exposure conditions in many environments.
|
The PBS post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. By featuring a 1 in stand-off height, it reduces the potential for decay at post and column ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APDPC decorative post cap is an Outdoor Accents? accessory that provides moisture protection and a decorative appearance to wooden post tops. The black textured composite material has UV protection. Available in sizes for nominal 4 x 4 and 6 x 6 wood posts.
|
The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
The LCE is designed to provide a connection when the end of a beam bears on a post. The versatile, two-piece design of this light post cap for end conditions can accommodate 4X and 6X lumber. The LCE is ideal for both new and retrofit construction and is load-rated when installed in pairs.
|
The LCE is designed to provide a connection when the end of a beam bears on a post. The versatile, two-piece design of this light post cap for end conditions can accommodate 4X and 6X lumber. The LCE is ideal for both new and retrofit construction and is load-rated when installed in pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
|
The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
|
The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outdoor Accents? decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post-base. They are ideal for outdoor projects such as pergolas, patio covers and other top-supported structures. These decorative side plates provide a black powder-coat finish over ZMAX? galvanization for extra corrosion resistance.
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AB Series of retrofit adjustable post-bases provide a 1 in stand-off for the post, are slotted for adjustability and can be installed with nails, Strong-Drive? SD connector screws or bolts (ABU). Depending on the application needs, these adjustable stand-off post-bases are designed for versatility, cost-effectiveness and maximum uplift performance.
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
The PBS post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. By featuring a 1 in stand-off height, it reduces the potential for decay at post and column ends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PB post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Available with standard or ZMAX? galvanization, which offers extra corrosion resistance for outdoor or treated-wood applications.
|
The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks.
|
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts.
|
Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Avant Collection? and feature a clean, timeless design that complements nearly every architectural style. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APVB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, but with the installation ease of a screw. APVB models include a 1 in stand-off from the concrete to help avoid post-end rot from moisture.
|
The ABA is designed to attach wooden posts to existing concrete. The built-in 1 in stand-off of this adjustable post-base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive? SD Connector screws. This versatile post-base makes a cost-effective option for securing a post to the foundation. This post-base is available in model sizes for double 2X, 4 x 4, 4 x 6 and 6 x 6 lumber, both nominal and rough. The new double 2X size can be used for installing a structural post consisting of two 2 x 4 studs nailed together as well as for securing double 2X beams to a footing for ground-level decks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AC is designed to provide a secure connection between a beam and a post. This post cap is ideal for new or retrofit applications where structural support is needed. The AC features both minimum and maximum nailing patterns for different load options.
|
Outdoor Accents? adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents? Mission Collection? and feature decorative edges with a southwestern flair that bring design elegance to your outdoor living areas. ZMAX? galvanized steel with a black powder-coat finish provides corrosion resistance. The APB post-bases install with the Outdoor Accents? structural wood screw and patented hex head washer (sold separately) the only approved fastener solution for Outdoor Accents? connectors. This screw and washer combination provides a decorative bolt-like connection, with the installation ease of a screw. APB models include a 1 in stand-off from the concrete to help avoid post-end rot caused by moisture.
|
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
|
|
