|
|
|
|
|
|
|
|
|
|
|
|
|
|
5/16 x 3/4 in door bumpers used to keep door panels from slamming the Jamb. Installs with screws. Clear vinyl material.
|
Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7 to 16 in hub diameter that extends from back 1/8 in.
|
Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
The 3/4 in T-shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Gray vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M 6014 is a swinging shower door catch that mounts onto the swinging door frame. The stainless steel housing contains a spring-loaded plastic latch and is adjustable. The mounting holes (slots) are 1 in apart.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.
|
Clear vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injection molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape, included or snaps into extrusion fin. Used by several shower door manufacturers.
|
M 6092 is a gray flat style shower door sweep that is 36 in long and 1-7/16 in wide and can be cut to size. It is held onto the swinging shower door by a metal drip rail that is located on the bottom of the door. Easy Installation - just remove the screws from the drip rail holding the old sweep and remove. Cut the new sweep to size, determine how far down the sweep needs to hang and install by replacing the drip rail over it and reinstalling the screws.
|
1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top hung, adjustable height, aluminum straight bracket, 3/4 in flat edge plastic, steel ball bearing wheel.
|
Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.
|
Clear acrylic self-adhesive commonly used on sliding medicine cabinets or mirrored doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco shower door seal. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 5/8 in W and 38 in L.
|
Gray plastic bottom guide edge mounts onto base frame with screws. Fits 7/16 in thick panels.
|
Gray vinyl, universal design, 1-1/2 in flat shape fits most older style drip rail systems. For use on hinged shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco shower door seal for sterling shower doors. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 3/8 in W and is 48 in L making sure you have enough seal for your shower door. This rubber seal has a specific hollow seal that works for designer pivot shower doors. This seal is the perfect piece to keep your shower door from leaking water onto your bathroom floor.
|
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure. Clear vinyl material.
|
Sliding tub enclosure knob system through bolts into a 3/8 in Dia hole in the glass panel. Rubber trim acts as glass panel bumper. Used on frameless shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.
|
Clear vinyl door bumper, self-adhesive. It is used to keep door panels from slamming the jamb.
|
Extruded aluminum bracket with thru-glass 1/4 in binder post, 3/4 in flat edge plastic wheel and steel ball bearings. It is perfect for used on frameless shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extruded aluminum bracket slides into slot on top of door. It has 3/4 in round edge plastic wheel, ball bearings and is used by Premier.
|
Extruded aluminum adjustable brackets, round edge plastic wheel, steel ball bearings, used on frameless shower doors, up to 3/16 in thick glass. Includes gray gasket.
|
White plastic bottom guide used on framed tub enclosure doors.
|
|
|
