|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
N 6658 is 7/8 in Dia anti-slam bumper that is installed onto the jamb with a screw. The bumper stands out 7/16 in from the surface it has been mounted to. It provides a protective anti-slam stop when closing bi-pass wardrobe doors.
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
National Hardware Door Cup Pull, Plate Size: 0.02 in, 0.34 in D, 1-3/4 in Dia, Flush Mounting, Steel, Brass, Fastener Type: Nail, Suitable for: 1/4 in and Larger Size Panels, By-Passing, Pocket and Other Sliding Doors, Includes: Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6558 is a set of nylon guides used on Glide-All bi-pass wardrobe door systems. They mount onto the back bottom frame section of steel panel style doors and extend into the bottom floor mounted track system.
|
1-Piece metal guide plate. Pivoting nylon guide posts stays parallel to the door preventing door binding. 3/4 or 1-3/8 in adjustable for slight door thickness variations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
N 6760 is a 3-Piece adjustable floor guide. Made of white nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6564 is a 3-Piece adjustable floor guide with adjustable slide sections. Made of white nylon, the 7/8 in tall guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick. Universal design used by many closet door manufacturers.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Prime-Line Door Pull, 3/4 in Dia, Brass, Satin Nickel, Suitable for: 3/4 in Dia Hole Sliding Closet Doors
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes 3 #8 x 3/4 in Phillips pan head screws.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
N 7316 is a 3-Piece adjustable floor guide. Made of tan nylon, the 1 in tall guides at each end can be adjusted inward to accommodate doors 7/8 to 1-3/8 in thick. Used by many closet door manufacturers.
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick by-passing doors up to 50 lb. Includes 2 #8 x 3/4 in Phillips pan head screws.
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
N 6559 is a set of handed white plastic guides that have a spring-loaded insert tip that fits bottom grooved tracks. They mount into the back bottom frame section of steel panel style doors & are held in place by a screw. Used on Glide-All door systems.
|
Designed for by-passing, pocket and other sliding doors. 3/4 in Dia hole. Works on panels 1/4 in or larger. Easy installation, no screws required.
|
|
|
