|
|
|
|
|
|
|
|
|
|
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8 in H aligners and four No.8 x 3/4 in Phillips pan head sheet metal screws.
|
Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
N 6672 is a nylon top mount bi-fold door pivot. Used by several manufacturers, the spring-loaded 3/8 in nylon pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
1-1/4 x 2 in, universal bi-fold door aligner, yellow zinc plated finish.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Adjustable Bi-Fold Top and Bottom Pivot Set, Plastic/Steel, White, Dimensions: 3/8 in Dia x 1 in H, Suitable for: Bi-Fold Doors, Includes: Pivot and Guide
|
N 6729 is a guide rod used in Benchmark bi-fold door systems. The 5/16 in Dia, 5-1/4 in long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 in nylon cap on the end.
|
N 6656 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges have a cutout that allows for the non-mortise installed.
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6703 is a spring loaded, 7/8 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Commonly used by Kenna Frame as well as countless other bi-fold door manufacturers.
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 7266 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 3/8 in Dia plastic housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its plastic housing. To install, lightly tap them into the pre-drilled top mount holes.
|
N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6704 is a spring loaded, 3/4 in Dia nylon roller guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by many bi-fold door manufacturers.
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6545 is a top mount bi-fold door pivot. Used on Acme and Cox doors, the spring-loaded 3/8 in pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16 in L x 1 in D x 1-1/4 in H overall. Bottom pivot with 7/16 in OD stem, nylon base and steel pin that has a 1/2 in OD tip with 3/8 in W groove. Includes bracket, bottom pivot and 3 installation screws.
|
3/8 in and 7/16 in post diameter. Replacement top guide kit fits Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll.
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the Pivot Bracket.
|
N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia steel housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its steel housing. To install, lightly tap them into the pre-drilled top mount holes.
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6655 is a set of steel floor guides with a nylon tip. Used in the past on Like Doors, it provides an alternative when the door thickness is larger than the ordinary or a heavy-duty floor guide is needed. The steel floor brackets are covered with a nylon tip that protects the doors as they pass through them.
|
N 7263 is a combination set of the top pivot and top guide typically used on several wood bi-fold doors. They are both spring loaded steel shafts set a in 7/16 in Dia nylon housing. The 7/8 in horizontal roller on the guide provides a smooth guiding of the lead door. The top pivot has a 1/4 in Dia pin set in its nylon housing. To install, lightly tap them into the pre-drilled top mount holes.
|
Steel base; fits Acme and Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H steel base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.
|
|