Home > HARDWARE > WINDOW & DOOR HARDWARE > PATIO DOOR HARDWARE > LATCHES / HANDLES
Sort By:
1 2
Prime-Line A 163 Sliding Screen Door Latch Strike With Hook Prime Line A 127 Door Latch Prime Line A 111 Door Latch/Pull
This screen door keeper or strike was often used by Columbia and trim view screen doors as well as many other screen door manufacturers. It is 1/2 in wide with a 9/16 in hook projection. It has an upward hook and adjustment slot that allows it to be adjusted up or down to the correct position to engage the latch. This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch. Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
Prime-Line A 141 Sliding Screen Door Shield Prime Line A186 Door Latch Pull Prime Line A108 Door Latch Pull
These screen shields provide protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handleset that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money & extends the life of the screen fabric. This sliding screen door handle and latch is non-handed and used on 1/2 in extruded and roll-formed doors. The handle has 3 in mounting holes. The steel latch is 2-13/16 in long with a 1/2 in projection and slides up and down to engage the keeper A 148 or A 162. It is used by aluminite as well as other patio door manufacturers. This sliding screen door handle and latch is used on Anjac as well as other patio door manufacturers. It is non-handed and used on 1/2 in Thick x 1-5/8 in W screen door frame. The nylon latch hook is 3/16 in long fits into a slot or mortise on the edge of the screen door. It has 3-3/4 in mounting holes and can be opened from both sides. There is a night lock on the inside. The nylon latch rotates to engage or disengage the A 125.
Prime-Line A 168 Door Latch and Pull Prime-Line A 187 Sliding Screen Door Latch and Pull Prime Line A 150 Cross Latch and Pull
This sliding screen door handle and latch is non-handed and used great aluminum screen doors as well as other patio door manufacturers. It contains a black plastic inside pull and outside pull. The handle mounting holes are 3 in. The steel latch is 2-9/16 in long with a 11/16 in projection and slides up and down to engage the keeper A 125 or A 217. This sliding screen door handle and latch is non-handed and used by several manufacturer's of hat section style doors. It contains an inside pull, outside pull and steel latch. The black plastic handles have mounting holes of 3 in. The latch is 3-11/16 in long with a 1-7/16 in projection and slides up and down to engage the keeper. Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch and installation screws. 2 in W x 4 in H handles.
Prime Line A 139 Door Latch/Pull Prime Line A165 Door Latch Pull Prime Line A 142 Cross Latch and Pull
Non-handed, mortise installation, fits on Academy, Better-Bilt and other door manufacturers. 2 in wide and 3 in between screw holes. Contains one plastic inside and outside pull, one steel latch assembly, one die-cast strike, installation screws. This sliding screen door handle fits a Columbia 1/2 in thick door as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 or A 166. The inside latch lever has a nite lock feature. Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
Prime-Line A 109 Door Latch and Pull With Security Lock Hampton V1195 Reversible Door Latch HANDLE SCRN DR 1IN THK DR
This sliding screen door handle and latch is non-handed and used on 1/2 in thick Columbia doors as well as other patio door manufacturers. It contains an inside pull and outside pull. The handles have 3 in mounting holes. The spring loaded nylon latch rotates up and down to engage the keeper A 125, A 163 OT A 166. The latch can be locked from the inside by the security lock. For 1 in thick Columbia door see A 157. Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws. Non-handed, black plastic inside and outside pulls, steel latch hook, steel keeper, vinyl top guides, for 1/2 in thick Columbia Series 4000 screen doors.
Prime Line C 1043 Door Handle Set Prime-Line C 1033 Internal Hook Latch Keyed Door Handle Set Prime-Line C 1023 Door Handle Set With Hook-Style Latch
Fits all popular flush lock punch outs for 1 in Thk doors. 3/4 x 2-3/4 in, universal design, die-cast, chrome finish keeper #E-2040 adjusts vertically. Includes 7-1/4 in L x 7/8 in W inside and outside pulls, latch on inside pull, keeper, installation fasteners and 4 assorted hooks (3/8 in, 3/4 in, 1/2 in and 5/8 in). 6-5/8 in installation hole spacing. Prime-Line Handle Set, Door Thickness: 1 to 1-1/8 in, Cylinder Size: 1/2 in, Key Type: Different, Bolt Hole Diameter: 0.395 in, Aluminum, Painted, Black, Suitable for: 7/8 in Thick Doors, Includes: (1) Inside Latch, (1) Outside Pull, (1) Locking Cylinder, (4) Hook Assortment, (1) Keeper, Installation Fasteners Prime-Line Handle Set, Door Thickness: 1 to 1-1/4 in, Bolt Hole Diameter: 3/16 in, Aluminum, Zinc, Zinc/Wood, Suitable for: Sliding Glass Doors, Includes: (1) Inside Pull and Latch Assembly, (1) Outside Pull, Installation Fasteners
Prime-Line C 1041 Keyed Outside Sliding Glass Door Pull HANDLE SLDG DR BLK AL SURF MT Prime Line C1005 Door Handle Set
Prime-Line Door Pull, 1 in W, Mortise Mounting, Black, Aluminum, Painted, Suitable for: Adam Rite and W and F Mortise Latches, Includes: Hardwares Surface-mounted; no mortising required. Separate lock inserted into base permits instant reversibility. Has a fixed anti-lift key to resist unauthorized entry by outside manipulation. Retracts to unlocked position if the door is closed with the hook extended. Prevents damage to keeper and lock assembly. Hook style latch. Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.
Prime Line C 1107 Sliding Door Lock Prime Line C-1018 Internal Lock Lever Handle Set Prime Line C1014 Door Handle Set
Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails. Designed to fit 90% of all internally latched doors including Viking. Reversible for right or left hand openings. Automatic unlatching option to prevent accidental lockouts. #E-2054 stamped steel sliding-glass-door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast aluminum. Includes inside pull and latch, outside pull, keeper and installation fasteners. For 1 in thick door rails. Handle Set, 3-7/8 in Designed for Ador/HiLite doors; extruded aluminum inside and outside pulls; wood grain feature strip; handle latches into door jamb (no strike necessary). Handle type: Surface-mounted. Latch style: Hook style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners.
Prime Line C1006 Door Handle Set Prime Line C-1095 Internal Lock Lever Handle Set HANDLE SLDG DR BLK WOOD PULL
Extruded aluminum inside pull with wood grain feature strip; clamp-latch with metal activator; flush extruded aluminum outside pull; used by many glass door manufacturers; latch hook profile is 1/2 in; projection is 1/2 in. Handle type - surface-mounted. Latch style - clamp style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners. Internally latched, reversible for right or left hand openings. Secondary night lock feature prevents external latch operation for added security. Automatic unlatching option to prevent accidental lockouts. E-2054 stamped steel, sliding glass door keeper allows for vertical adjustments. Stained solid wood handle, all other parts of finished die-cast. Includes inside wood pull and latch, outside pull, keeper and installation fasteners. For 1 in Thk door rails. Standard reversible surface mount handle set for left or right handed mortise locking doors. Hook style latch, mortise style handle, extruded aluminum inside pull has wood grain feature strip and a black die-cast outside pull designed to be used with any of the following latching units; E-2008, E-2009, E-2014, E-2079 and E-2111.
Prime Line C1116 Door Handle Set Prime Line C 1000 Reversible Door Handle Set Prime-Line C 1016 2-Way Glass Door Handle
Extruded aluminum inside pull; clamp-latch with metal activator; die-cast outside pull has knockout for converting to keyed cylinder lock; latch hook profile is 1/4 in; projection is 1/2 in; used by many patio door manufacturers. Handle Type: Surface-Mounted. Latch Style: Clamp Style. Contents: 1 inside pull and latch assembly; 1 outside pull; installation fasteners. Extruded aluminum pulls, inside and out. Fixed anti-lift bar for added security. Reversible for right or left hand doors. Contains one inside pull and latch assembly, one outside pull, one face mounting keeper and installation fasteners. Prime-Line Handle Set, Door Thickness: 7/8 to 2-3/8 in, Bolt Hole Diameter: 3/16 in, Aluminum, Aluminum, Gray, Suitable for: Sliding Glass Doors, Includes: (1) Inside Pull and Latch Assembly, (1) Outside Pull, (1) Keeper, Installation Fasteners
   
 
1 2